Precision Lab Water Bath
Precision Lab Water Bath
Model No.: BE-
- Multitudes of Bath size for Varities of application expectation
- Small to large capacity Bath, heater element top cover & other wetted Parts with 304 grade S. Steel for years of life & easy of daily clean.
- S. Steel perforated 304 grade diffuser plate.
- Drain Plug made of brass duly Nickled on the back of the bath.
- Full feature with Digital Temp. Controller / Indicator & Microprocessor Based PID Temp. Controller Cum Indicator (On customer demand)
- Stability up to 0.5°C or better
- Better mineral / glasswool insulation to keep the surface comfortable to work
- Low water cut off system / water level with Indicator (Provided on customer request)
- Best quality Bi-Metallic capillary Thermostat to give accurate results
Applications:
Drying, Paint, Bitumen & Rubber Industries, Medical & Food Industries, Institute, Agriculture requiring Controlled Temp above Ambient
Specification:
| Model | UTS 1.04 Single Walled | UTS 1.05 A Double Walled 6 Holes | UTS 1.05 B 12 Holes | UTS 1.06 A 2 Racks D. Walled | UTS 1.06 B 4 Racks D. Walled | UTS 1.06 C 6 Racks D. Walled | UTS 1.06 D 8 Racks D. Walled |
|---|---|---|---|---|---|---|---|
| Capacity “L” | 8 Ltrs. 15 Ltrs. | 8 Ltrs. | 15 Ltrs. | 14 Ltrs. | 18 Ltrs. | 25 Ltrs. | 30 Ltrs. |
| Heater Wattage “W” | Kettle Element 1.5/ 2.0KW | 1.5 KW | 1.5 KW | 1.5 KW | 2.0 KW | 2.0 KW | 2.0 KW |
| Shelves | – | – | 1 | 1 | 1 | 1 | 1 |
| Dimensions (Internal mm) | 300 x 250 x 100 425 x 325 x 100 | 300 x 250 x 100 | 425 x 325 x 100 | 300 x 250 x 175 | 325 x 300 x 175 | 450 x 300 x 175 | 600 x 300 x 175 |
| Bath Opening | 6 Holes of 3″ Dia 12 Holes of 3″ Dia | 6 Holes of 3″ Dia | 12 Holes of 3″ Dia | SS Plain Lid | SS Plain Lid | SS Plain Lid | SS Plain Lid |
| * Dimensions are expressed in (Width x Depth x Height) | |||||||
Technical Parameters:
| Control Panel : | Temp. Controller, With Mains & Load Indicator, Mains Switch |
|---|---|
| Temperature Range : | Ambient to 95 °C |
| Temperature Stability : | +-0.5°C or better/ +- 0.2°C or better Incase of Digital Temp. Controller or Microprocessor Based PID Temp. Controller |
| Housing Material : | CRC / Mild Steel Sheet with Powder Coated |
| Optional : | Outer body of S.S. 304 grade also can be made on customer demand |
| Interior Tank : | S. Steel 304 grade water Tank duly sealed leak proof |
| Insulation : | Glasswool/ Mineral Wool |
| Power Consumption : | 220/230V, AC Supply +- 10% 50Hz |
| Duty Cycle : | Continuous ( Do check water level as per test requirement ) |