balaji

  • Kh. No. 107/1, Hastsal Industrial Area Uttam Nagar New Delhi -110059 India
Facebook Twitter Youtube
Menu
  • Kh. No. 107/1, Hastsal Industrial Area Uttam Nagar New Delhi -110059 India
  • +91-9654485862
Menu

LABORATORY EQUIPMENT INSTRUMENTS

AUTOCLAVE (Portable)

Model No.: BE-0023

Made of aluminum or stainless steel, having 63mm pressure gauge, stopcock, additional
safety valve, steam release valve container and stand electrical

Sizes in MM In Liters Capacity
300 x 300mm 20 Liters
300 x 375mm 25 Liters
Enquiry

VERTICAL AUTOCLAVE DOUBLE WALL

Model No.: BE-0024

A versatile, electrically heated sterilizer under saturated steam of adjustable pressure of
10 to 20 psi. Double walled construction with boiler & steam jacket made of thick
stainless steel and gap is filled with high grade glass wool to bring the temperature loss to
a minimal level.The outer chamber is made out of thick stainless steel.The lid is made of
thick stainless steel plate (joint less) and can be sealed by a joint less neoprene rubber
gasket by wing nuts through hinged bolts by engaging slotted lugs on rim of the cover.
Provided with wingnut (brass nut) dial pressure gauge, air/stam release cock, water level
indicator, sprint loaded safety valve adjustable to any required point from 10 psi to 20 psi
with accuracy ±3 psi.A drain cock has also been provided.A double safety valve has also
been provided along with inlet. Supplied complete in stainless steel and stainless steel
dressing bins.

Inner Dimension Dimension of Basket Capacity Heater Load
250 x 450mm 225 x 300mm 22 Ltrs. 2.0 KW
300 x 500mm 275 x 350mm 40 Ltrs 2.0 KW
350 x 550mm 325 x 400mm 50 Ltrs. 3.0 KW
400 x 600mm 375 x 450mm 78 Ltrs. 4.0 KW
450 x 600mm 425 x 450mm 98 Ltrs. 4.0 KW
550 x 750mm 525 x 600mm 187 Ltrs. 4.0 + 1.0KW
Enquiry

VERTICAL HIGH PRESSURE AUTOCLAVE TRIPLE WALL

Model No.: BE-0025

Triple wall construction i.e. working chamber, water chamber and outer jacket made
from high grade stainless steel with mirror finish. Lid made of heavy duty stainless steel
plate. Having appropriate pressure gauge, stop cock, safety device, steam release valve,
water inlet and outlet valves. Fitted with water level indicator and comes with stainless
steel basket & low water cutoff device & pressure control switch.

Sizes in MM Sizes in Inches In Liters Capacity Load
250 x 450mm 10 x 18” 22 Liters 2 KW
300 x 500mm 12 x 20” 40 Liters 2 KW
350 x 550mm 14 x 22” 50 Liters 3 KW
400 x 600mm 16 x 24” 78 Liters 4 KW
450 x 600mm 18 x 24” 98 Liters 5 KW
550 x 750mm 22 x 30” 152 Liters 6 KW
Enquiry

HORIZONTAL HIGH PRESSURE AUTOCLAVE DOUBLE WALL

Model No.: BE-0026

Cylindrical (Double Walled) Inner and outer chamber made of thick SS fitted with
automatic pressure control switch, low water cutoff device, digital temperature
controller cum indicator with inbuilt timer vacuum breaker

Sizes in MM In Liters Capacity Load
400 x 600mm 78 Liters 6 KW
400 x 1100mm 162 Liters 9 KW
500 x 900mm 165 Liters 9 KW
500 x 1200mm 221 Liters 9 KW
OPTIONAL ACCESSORIES:

1. 96×200 controller RTD input/low water cut off input/SSR, Relay input and out for
2. Pressure Transmitter for autoclave (pressure sensor)
3. Rs. 485 data serial port + data recorder.
4. Thermal printing for autoclave.
heater. Changeable purging and sterilizing range/pressure input controller
special for Horizontal Autoclave

Enquiry

HORIZONTAL HIGH PRESSURE AUTOCLAVE TRIPLE WALL

Model No.: BE-0027

Cylindrical (Triple Walled) Inner and outer chamber made of thick SS fitted withautomatic pressure control switch, low water cutoff device, digital temperature controller cum indicator with inbuilt timer vacuum breaker, automatic self locking safety door, moisture trap, purging on/off system and multiport valve.

Chamber Sizes in MM Chamber Sizes in Inches Capacity Load
400 x 600mm 16 x 24” 78 Liters 6 KW
400 x 1100mm 16 x 36” 162 Liters 9 KW
400 x 1100mm 16 x 36” 162 Liters 9 KW
500 x 1200mm 20 x 48” 221 Liters 9 KW
OPTIONAL ACCESSORIES:
1. 96×200 controller RTD input/low water cut off input/SSR, Relay input and out for heater. Changeable purging and sterilizing range/pressure input controller special for Horizontal Autoclave.
2. Pressure Transmitter for autoclave (pressure sensor)
3. Rs. 485 data serial port + data recorder.
4. Thermal printing for autoclave.
Enquiry

RECTANGULAR HIGH PRESSURE AUTOCLAVE

Model No.: BE-0028

Chamber Sizes in MM Chamber Sizes in Inches Capacity Load
450 x 450 x 900mm 18 x 18 x 36” 180 Liters 6 KW
450 x 600 x 900mm 18 x 24 x 36” 240 Liters 9 KW
600 x600 x 900mm 24 x 24 x 36” 320 Liters 9 KW
600 x 600 x 1200mm 24 x 24 x 48” 430 Liters 9 KW
OPTIONAL ACCESSORIES:
  1. 96×200 controller RTD input/low water cut off input/SSR, Relay input and out for heater. Changeable purging and sterilizing range/pressure input controller special for Horizontal Autoclave.
  2. Pressure Transmitter for autoclave (pressure sensor)
  3. 485 data serial port + data recorder.
  4. Thermal printing for
Enquiry

LAMINAR AIR FLOW CABINET HORIZONTAL

Model No.: BE-0029

Laminar flow principle involves double filtration of air through pre-filters (upto 5 microns) and hepa filters (down to 0.3 microns) for filteration of biological and particulate contaminants unidirectional air flow is drawn from atmosphere and passed through pre and hepa filtered on to the work surface.Table top covered with laminated sheet or SS sheet (optional) side panels are fixed and are made out of transparent acrylic sheet. Front door is also made of acrylic sheet. Superior motor is used for blower. Unit is supplied with manometer, UV tube, fluorescent lighting tubes.

Internal Work zone Dimension (LxDxH) Feet Wooden Mild Steel Stainless Steel
2’ x 2’ x 2’
3’ x 2’ x 2’
4’ x 2’ x 2’
6’ x 2’ x 2’
OPTIONAL ACCESSORIES:
  1. Magnehelic Gauge (To track filter pressure) in lieu of static pressure
  2. Microprocessor LCD Controller with Auto Switch off mode for motor blower when door is closed. Digital buzzer timer sounds an audio alarm in completion of sterilizing time of the chamber and the switches off V. germicidal tune and automatically switches ON the fluorescent light, alerting the user that the bench is ready for use.
  3. Digital timer for V. Light & blower
Enquiry

LAMINAR AIR FLOW VERTICAL

Model No.: BE-0030

Laminar flow principle involves double filtration of air through pre-filters (upto 5 microns) and hepa filters (down to 0.3 microns) for filteration of biological and particulate contaminants unidirectional air flow is drawn from atmosphere and passed through pre and hepa filtered on to the work surface.Table top covered with laminated sheet or SS sheet (optional) side panels are fixed and are made out of transparent acrylic sheet. Front door is also made of acrylic sheet. Superior motor is used for blower. Unit is supplied with manometer, UV tube, fluorescent lighting tubes.

Internal Work zone Dimension (LxDxH) Feet Wooden Mild Steel Stainless Steel
2’ x 2’ x 2’
3’ x 2’ x 2’
4’ x 2’ x 2’
6’ x 2’ x 2’
OPTIONAL ACCESSORIES:
  1. Magnehelic Gauge (To track filter pressure) in lieu of static pressure
  2. Microprocessor LCD Controller with Auto Switch off mode for motor blower when door is closed. Digital buzzer timer sounds an audio alarm in completion of sterilizing time of the chamber and the switches off V. germicidal tune and automatically switches ON the fluorescent light, alerting the user that the bench is ready for use.
  3. Digital timer for V. Light & blower
Enquiry

FUME HOOD

Model No.: BE-0031

Fume exhaust hoods are designed to contain and throw out toxic, obnoxious pungent smelling gases to protect personal and equipment in the laboratories. A motor driven blower creates negative pressure and sucks contaminated air from work areas and throws it in high up atmosphere through ducting. Fabricated out of thick ply board clad from outside with laminated sheet and inside finished in non-corrosive epoxy paint. An up-down sliding sash with glass sheet is provided. Flurescent lighting is also provided. A gas tap, water tap and wash basin is also provided.

Internal Work zone Dimension (LxDxH) Feet Wooden Mild Steel Stainless Steel
3’ x 2’ x 2’
4’ x 2’ x 2’
5’ x 2.5’ x 2.5’
6’ x 2’ x 2’
OPTIONAL ACCESSORIES:
  1. Magnehelic Gauge (To track filter pressure) in lieu of static pressure
  2. Microprocessor LCD Controller with Auto Switch off mode for motor blower when door is closed. Digital buzzer timer sounds an audio alarm in completion of sterilizing time of the chamber and the switches off V. germicidal tune and automatically switches ON the fluorescent light, alerting the user that the bench is ready for use.
  3. Digital timer for V. Light & blower
Enquiry

BIOLOGICAL SAFETY CABINET

Model No.: BE-0032

Offered here is an exhaustive range of Biological Safety Cabinets in class II/Type 2 that are designed for universities, research laboratories, pharmacies and pharmaceuticals companies to protect both users and procedures from contamination when workingwith biological fields.These are extensively used in protecting the operator from cross contamination of samples and primary containment of the bio hazardous materials being used. It operates with minimum airflow velocity of 100 fpm (0.5 m/s) through face opening.

Internal Workzone Dimension (LxDxH) Feet Size of Hepa Filter No. of Hepa Filter Illumination
2’ x 2’ x 2’ 2’ x 2’ x 6’ 1 1 x 20W
3’ x 2’ x 2’ 3’ x 2’ x 6’ 1 1 x 20W
5’ x 2.5’ x 2.5’ 4’ x 2’ x 6’ 2 1 x 30W
Internal Work zone Dimension (LxDxH) Feet Wooden Mild Steel Stainless Steel
3’ x 2’ x 2’
4’ x 2’ x 2’
5’ x 2.5’ x 2.5’
OPTIONAL ACCESSORIES:
  1. Microprocessor Controller with door position alarm with Auto Switch off mode for motor blower when door is Digital buzzer timer sounds an audio alarm on completion of sterilizing time of the chamber and the switches off U.V. germicidal tune and automatically switches ON the fluorescent light, alerting the user that the bench is ready for use.
  2. Magnehelic Gauge
  3. Digital timer for UV light & blower
  4. Digital air velocity/flow meter
Enquiry

PASS BOX STATIC

Model No.: BE-0033

Static Pass Box made of stainless steel 304 grade, double walled, complete with magnetic interlocking system on two doors, U.V light, fluorescent light.

Working Chamber Size
18”x18”x18”
24”x24”x24”
24”x24”x24”
36”x36”x36”
Enquiry

PASS BOX DYNAMIC

Model No.: BE-0034

Dynamic Pass Box made of stainless steel 304 grade, double walled, fitted with magnetic interlocking system on two doors. Complete with motor blower and HEPA filter’ magnehelic gauge for pressure, flourescent light, UV light for germinal free area.

Working Chamber Size
18”x18”x18”
24”x24”x24”
36”x24”x24”
36”x36”x36”
Enquiry

INDUSTRIAL AIR CURTAIN

Model No.: BE-0035

Offered by us are superior qualities industrial air curtains are used to create a curtain of air between air-conditioned and clean room to adjoining room.Widely used in various industries like, hospitals, hotels, and showrooms etc, these quality-tested Air Curtains are offered in varied specifications and that too at very affordable prices.This high end machinery ably creates an invisible barrier of high velocity air which provides complete protection against insects, dust, dirt and fumes.

Door Width
900mm
1200mm
1500mm
Enquiry

INFRARED MOISTURE BALANCE

Model No.: BE-0036

A basic method for determination of moisture content, measure moisture percentage by weight and drying simultaneously. Infra Red radiation are radiation are reflector by a bulb and its Temperature is controlled by a regulator.The balance scale is divided in terms of moisture content on net weight basis.

Specification:
Range Accuracy 0-100%
Dimension 38x35x38cm.
Weight 20 kgs. Approx
A.C. Mains 220V 50Hz
Enquiry

HOT AIR UNIVERSAL OVEN (MEMMERT TYPE)

Model No.: BE-0037

Standard double wall construction. Outer made of mild steel duly enamel painted or powder coated paint, inner made out of anodized aluminum or stainless steel sheet. Heating elements provided at bottom & two sides temperature controlled by hydraulic type of thermostat or Digital temperature controller.Temperature +5°C Ambient to 250°C with accuracy ±1°C.To work on 220V.

Internal Dimension (in millimeters) Capacity Heat Load No. of Shelves
300 x 300 x 300 28 Ltrs. 0.75 KW 2
355 x 355 x 355 45 Ltrs. 0.75 KW 2
455 x 455 x 455 95 Ltrs. 1.50 KW 2
455 x 455 x 605 125 Ltrs. 1.50 KW 2
605 x 605 x 605 252 Ltrs. 2.25 KW 3
605 x 605 x 910 336 Ltrs. 2.25 KW 3
605 x 910 x 910 500 Ltrs. 3.75 KW 3
910 x 910 x 910 750 Ltrs 4.5 KW 3
OPTIONAL ACCESSORIES:
  1. Air circulation fan
  2. Microprocessor PID Temperature Controller-cum-indicator in LED
Enquiry

HOT AIR UNIVERSAL OVEN - DELUXE MODEL

Model No.: BE-0038

Standard double wall construction. Outer made of mild steel duly enamel painted or powder coated paint, inner made out of stainless steel sheet. Heating elements provided at bottom & two sides.

Temperature Range : +5°C Ambient to 250°C Temperature Accuracy :+1Co Forced Convection : Available with forced convection system (Standard Features). Temperature Controller : Microprocessor based Digital Temperature Indicator-cum-controller with in following features
  1. Digital 16×2 alhpa numeric jumbo LCD display
  2. Digital temperature control and display
  3. Digital timer with enable /disable feature
  4. Temperature overshoot and process complete alarm Automatic fan On/off function, On/Off timer for fan motor for better & long life of fan motor.
Temperature Display : Through Digital Indicator
Internal Dimension (in millimeters) Capacity Heat Load No. of Shelves
300 x 300 x 300 28 Ltrs. 0.75 KW 2
355 x 355 x 355 45 Ltrs. 0.75 KW 2
455 x 455 x 455 95 Ltrs. 1.50 KW 2
455 x 455 x 605 125 Ltrs. 1.50 KW 2
605 x 605 x 605 252 Ltrs. 2.25 KW 3
605 x 605 x 910 336 Ltrs. 2.25 KW 3
605 x 910 x 910 500 Ltrs. 3.75 KW 3
910 x 910 x 910 750 Ltrs 4.5 KW 3
OPTIONAL ACCESSORIES:
  1. Communication Port for PC Interface, complete with Communication cable with USB Interface
  2. Digital Micro controller with Ramp and Soak Facility Profiler
  3. Fuzzy Logic Control PLC-HMI
Enquiry

OVEN INDUSTRIAL (Drier)

Model No.: BE-0039

Double wall construction body is fabricated on heavy duty angle channel frame outer & inner made of Mild Steel sheet.The Gap between the two wall of 75mm is filled with high temperature resistant glass wool.Temperature range ±10ºAmbient to 300º C controlled by digital temperature controller cum indicator with inbuilt timer.

Size in mm Size in Inches
900 x 600 x 600 36 x 24 x 24”
1200 x 900 x 600 48 x 24 x 24”
900 x 900 x 900 36 x 36 x 36”
1200 x 900 x 900 48 x 36 x 36”
1200 x 1200 x 1200 60 x 36 x 36”
1800 x 900 x 900 72 x 36 x 36”
1800 x 975 x 975 72 x 39 x 39”
1800 x 1200 x 1200 72 x 48 x 48”
2400 x 1200 x 1200 96 x 48 x 48”
OPTIONAL ACCESSORIES:
  • Digital Temperature Controller Cum
  • Digital
  • Microprocessor based Digital Temperature controller
    • with inbuilt timer in LCD with temperature over shoot alarm.
    Enquiry

    BOTTLE DRIER

    Model No.: BE-0040

    Standard double wall body and double door provided with digital temperature controller both sides opening. Forced air blower also provided.Temperature range to 200ºC ± 5C for 18 x 15 x 6” crates.

    Size
    For 8 Crates 18 x 5 x 6”
    For 10 Crates 18 x 5 x 6”
    For 12 Crates 18 x 5 x 6”
    For 16 Crates 18 x 5 x 6”
    For 20 Crates 18 x 5 x 6”
    For 24 Crates 18 x 5 x 6”
    OPTIONAL ACCESSORIES:
    • Digital Temperature Controller Cum Indicator
    • Digital Timer
    • Rack for Bottle
    Enquiry

    TRAY DRIER

    Model No.: BE-0041

    Body is fabricated on heavy duty angle channel frame with outer body made of Mild Steel sheet dully painted in hammer tone paint or in powder coating paint and inner body made of Stainless Steel sheet.The 75mm gap between the two walls will be filled by high grade temperature resistant glass wool as a insulation. Air circulation fan blade motor is given to circulate the heat in the chamber and to maintain equal temperature on all sides. Temperature range +5ºC ambient to 200ºC controlled by digital temperature controller cum indicator with a high class panel attached on the body

    Size of Drier Tray Size
    For 12 Tray Provision 16x32x1¼ “
    For 24 Tray Provision 16x32x1¼ “
    For 36 Tray Provision 16x32x1¼ “
    For 48 Tray Provision 16x32x1¼ “
    For 96 Tray Provision 16x32x1¼ “
    Enquiry

    VACUUM OVEN

    Model No.: BE-0042

    Double walled fabrication, outer made of heavy duty mild steel and inner made of heavy stainless steel. Exterior finished in stoving enamel paint or powder coated paint.
    Temperature range ambient to 130ºC ± 2ºC controlled by hydraulic thermostat or digital temperature controller. Capable with stand vacuum to 760mm hg. workable on 220V AC. see through end glass window provided.Vacuum gauge also provided along with a shelf.
    Size of Chamber in MM Capacity
    300 x 300mm 22 Ltr.
    300 x 600mm 44 Ltr.
    250 x 250 x 250mm 16 Ltr.
    300 x 300 x 300mm 28 Ltr.
    455 x 455 x 455mm 95 Ltr.
    Enquiry

    BACTERIOLOGICAL INCUBATORS (Memmert Type)

    Model No.: BE-0043

    Standard Double wall construction inner body made of high grade aluminum sheet or
    Stainless Steel and outer body made of mild steel sheet duly painted in powder coated
    paint.The gap between the two wall will be filled by high grade glass wool of 75mm to
    avoid thermal loss. Bided Heating elements are placed in bottom and two sides (Ribs)
    made of kanthal.Aone wire (best quality wire in India) Chamber is provided with groves
    to hold shelves and to adjust shelves according to the requirement temperature range
    +5ºC ambient to 90ºC controlled by thermostat.To work on 220/230V AC. Comes with
    two aluminum shelves.

    Size in MM Size in Inches No. of Shelves
    300 x 300 x 300mm 12 x 12 x 12” 2
    355 x 355 x 355mm 14 x 14 x 14” 2
    400 x 400 x 400mm 16 x 16 x 16” 2
    455 x 455 x 455mm 18 x 18 x 18” 2
    605 x 455 x 455mm 24 x 18 x 18” 2
    605 x 605 x 605mm 24 x 24 x 24” 2
    910 x 605 x 455mm 36 x 24 x 18” 2
    910 x 605 x 605mm 36 x 24 x 24” 2
    910 x 910 x 910mm 36 x 36 x 36” 2
    Enquiry

    BACTERIOLOGICAL INCUBATORS DELUXE MODEL

    Model No.: BE-0044

    Standard Double wall construction inner stainless steel & outer body made of mild steel duly powder coated.The gap between the two wall will be filled by high grade glass wool of 75mm to avoid thermal loss. Bided heating elements are placed in bottom and two sides (Ribs) made of kanthal a one wire (best quality wire in India). Chamber is provided with groves to hold shelves and to adjust shelves according to the requirement. Temperature range +5ºC ambient to 90ºC controlled by Microprocessor Based PID type digital controller cum indicator with following features
    Digital 16×2 alpha numeric jumbo LCD display.
    Digital temperature control and display
    Digital timer with enable/disable features.
    Temperature overshot and process completer alarm.
    Auto fan on/off function.
    To work on 220/230V AC.
    Size in MM Size in Inches No. of Shelves
    300 x 300 x 300mm 12 x 12 x 12” 2
    355 x 355 x 355mm 14 x 14 x 14” 2
    400 x 400 x 400mm 16 x 16 x 16” 2
    455 x 455 x 455mm 18 x 18 x 18” 2
    605 x 455 x 455mm 24 x 18 x 18” 2
    605 x 605 x 605mm 24 x 24 x 24” 2
    910 x 605 x 455mm 24 x 24 x 24” 2
    910 x 605 x 605mm 36 x 24 x 24” 2
    910 x 605 x 455mm 36 x 24 x 18” 2
    910 x 605 x 605mm 36 x 24 x 24” 2
    910 x 910 x 910mm 36 x 36 x 36” 2
    Enquiry

    B.O.D. INCUBATOR

    Model No.: BE-0045

    Double walled construction, inner made out of highly polished stainless steel sheet,
    outer made of mild steel sheet duly finished in stoving enamel paint or powder coating
    pain provided with magnetic gasket. Inner door is made of transparent acrylic sheet or
    operated inner illumination has been provided. Castor wheels are also provided.
    Temperature range 5ºC to 50ºC ± 1ºC is controlled by digital temp. Controller cum
    indicator standard cooling unit is installed for low temperature working, inner air
    circulation system also provided.A control panel with indicators equipment to work on
    220V AC.

    Inner Dimension in MM Capacity Volume No. of Shelves
    350 x 350 x 400mm 64 Ltrs. 2.0 Cuft. 2
    455 x 410 x 610mm 112 Ltrs. 4 Cuft 2
    505 x 415 x 830mm 171 Ltrs 6.1 Cuft 2
    570 x 550 x 875mm 280 Ltrs. 10 Cuft. 3
    650 x 580 x 900mm 340 Ltrs. 12 Cuft. 3
    650 x 650 x 950mm 425 Ltrs 15 cuft. 3
    Enquiry

    ORBITAL SHAKING INCUBATOR (B.O.D.Type)

    Model No.: BE-0046

    Standard double construction. Exterior made out of mild steel sheet duly finished in
    powder coating paint. Inner chamber made of highly polished stainless steel sheet.
    Double door with glass window. Inter changeable platform has been provided temp.
    range 5ºC to 60ºC ± 1ºC is controlled by a digital controller.Variable speed control
    regulator to control speed upto 200 rpm provided.

    Capacity
    9 x 500/250ml Flasks
    16 x 500/250ml Flasks
    24 x 500/250ml Flasks

    Temperature Control : Microprocessor Based Digital Temperature Indicator-cum-Controller with digital RPM indicator.

    OPTIONAL ACCESSORIES:
    • 1. Communication Port with interface and data cable for temperature to download data to your PC.
    • 2. Spare lotus clamps made of S.S on trays
    Enquiry

    DRY BATH INCUBATOR

    Model No.: BE-0047

    Digital, 24 holes for 12mm tubes, +5°C above ambient to 70°C.Temperature sensor PT- 100. Maximum heating power 125W,Temperature Controller PID,Timer 1 min to 99 minutes, LCD Display for time & temperature, Anodized Aluminum block 220V AC, Available with Buzzer alarm & overheat protection.
    Enquiry

    BLOOD BANK REFRIGERATOR

    Model No.: BE-0048

    Double wall fabrication with inner chamber of highly polished stainless steel sheet and external one is made of mild steel sheet duly finished in stowing enamel.Temp. is maintained from 4°C to 6°C by digital temperature controller-cum-indicator and triggers the audio visual alarm in event of fluctuation. Cooling is achieved by hermetically sealed compressor unit.To work on 220V AC.

    Capacity (In Liters) No. of Bags
    85 Liters 50 Blood Bags
    165 Liters 110 Blood Bags
    200 Liters 200 Blood Bags
    280 Liters 250 Blood Bags
    400 Liters 360 Blood Bags
    Enquiry

    MORTUARY CHAMBER

    Model No.: BE-0049

    Double wall construction inner stainless steel and outer mild steel duly painted with rust proof paint.Trays travel on rollers fitted with ball bearing, trays made of stainless sheet to carry bodies are provided with handles.Temperature Range 2C to 5°C controlled by digital temperature controller cum indicator to work on 220 Volts AC Supply.

    Capacity Temp. Voltage Stabilizer
    Single Body 2° to 5°C 3 KVA
    Two Bodies 2° to 5°C 4 KVA
    Three Bodies 2° to 5°C 5 KVA
    Four Bodies 2° to 5°C 8 KVA
    Six Bodies 2° to 5°C 8 KVA
    OPTIONAL ACCESSORIES:
    • Automatic voltage stabilizer.
    Enquiry

    HUMIDITY CHAMBER

    Model No.: BE-0050

    Standard double wall construction inner chamber made out of highly polished stainless steel sheet outer made of mild steel duly painted in powder coated paint or stoving paint. Temperature range 5ºC to 55ºC ± 2ºC and humidity from 55% to 95% ±3% Rh. Stainless steel water reservoirs heated by immersion heaters provide humidity complete with all accessories

    Inner Chamber Size (In mm) Capacity
    455 x 455 x 455 mm 95 Liters
    455 x 455 x 710 mm 147 Liters
    605 x 605 x 605 mm 335 Liters
    OPTIONAL ACCESSORIES:
    • Digital Temperature Controller Cum
    • Automatic electronic controller with digital display for & humidity combined.
    • Low water cut-off
    Enquiry

    ENVIRONMENTAL CHAMBER (Humidity Cabinet Delux)

    Model No.: BE-0051

    • Suitable for carrying out different quality control tests under controlled conditions of temperature and humidity.
    • The excellent quality of door packing for the external
    • User oriented design of shelves makes you adjust each space of shelves without difficulty.
    • Inner chamber and trays are made of stainless steel (S.S.-304 Grade)
    • Outer wall of mild steel sheet duly powder
    • Mounted on caster wheels for easy
    • High grade glass wool insulation between outer and inner chamber for minimal thermal loss.
    • Front double walled door is provided with lock and key
    • A self-cooled air circulation fan is fitted to maintain uniform temperature and humidity conditions throughout the chamber.

     

    Inner Dimension in MM Capacity Volume No. of Perforated Tray
    455 x 410 x 610mm 112 Ltrs 4.0 Cuft. 2
    505 x 415 x 830mm 171 Ltrs 6.1 Cuft. 2
    605 x 605 x 605mm 224 Ltrs. 8.0 Cuft. 2
    570 x 550 x 875mm 280 Ltrs 10.0 Cuft. 3
    650 x 580 x 900mm 340 Ltrs. 12.0 Cuft. 3
    700 x 640 x 900mm 420 Ltrs 15.0 Cuft. 4
    OPTIONAL ACCESSORIES:

    • Communication Port with interface and data cable to download to your PC with PLC & HMI.

    Enquiry

    DEEP FREEZER, -20°C & -40°C

    Model No.: BE-0052

    Double wall construction with PUF insulation between inner and outer wall. Refrigeration system through hermitically sealed compressor inner high grade stainless steel outer made of mild steel sheet duly painted in powder coated paint.Temperature range upto-20°C controlled by microprocessor based digital temperature controlled cum indicator.

    Capacity Size in Inches
    4 Cubic Feet 15”x20”x24”
    6 Cubic Feet 20”x16”x34”
    10 Cubic Feet 22”x22”x36”
    12 Cubic Feet 26”x23”x36”
    15 Cubic Feet 48”x 26”x 26”
    OPTIONAL ACCESSORIES:

    • Automatic voltage stabilizer.

    Enquiry

    STABILITY CHAMBER

    Model No.: BE-0053

    Standard Double wall construction inner/outer chamber made out of highly polished stainless steel sheet of 304 grade.Temperature range 10°C to 60°C ± 0.5°C and humidity from 35% to 95% or less RH controlled by Microprocessor based PID type digital controlled with following features :

    1. Digital LCD
    2. Microprocessor based PID temperature controller cum
    3. Microprocessor based PID humidity controller cum
    4. Low water cut
    5. Auto dehumidified for better
    6. Temperature and humidity overshoot alarm temperature below ambient is controlled by a sealed Stainless steel reservoirs heated by immersion heaters provide humidity complete with all accessories.
    7. Comes with 21 CFR
    Inner Chamber Size (In Inches) Capacity
    21” x 18” x 18” 125 Ltrs.
    24” x 24” x 24” 225 Ltrs.
    36” x 24” x 24” 336 Ltrs.
    48” x 26” x 26” 500 Ltrs
    15 Cubic Feet 1000 Ltrs.
    Enquiry

    MUFFLE FURNACE (Laboratory Model)

    Model No.: BE-0054

    Outer shell made out of thick mild steel sheet duly finished in stoving enamel paint. Fitted with Muffle Block for supporting heating elements working temperature 900ºC controlled by superior energy regulator or digital temperature controller cum indicator. Maximums temperature 1000ºC. Complete with CI/AL thermocouple with pyrometer, thermal fuse etc.

    Internal Dimension in Inches Internal Dimension in mm Working Temperature
    9 x 4 x 4 225 x 100 x 100 900C0
    10 x 5 x 5 250 x 125 x 125 900C0
    12 x 5 x 5 300 x 125 x 125 900C0
    12 x 6 x 6 300 x 150 x 150 900C0
    12 x 8 x 8 300 x 200 x 200 900C0
    18 x 9 x 9 450 x 225 x 225 900C0
    OPTIONAL ACCESSORIES:

    • Microprocessor Based PID Temperature Indicator-cum-controller in LED

    Enquiry

    MUFFLE FURNACE (Industrial Model)

    Model No.: BE-0055

    Same specification as above model but maximum temperature is 1150° C with high clamp panel with include voltmeter, MCBs, Lights etc.

    Internal Dimension in Inches Internal Dimension in mm Working Temperature
    9 x 4 x 4 225 x 100 x 100 1100C0
    12 x 6 x 6 300 x 150 x 150 1100C0
    12 x 8 x 8 300 x 200 x 200 1100C0
    18 x 9 x 9 450 x 225 x 225 1100C0
    Enquiry

    WATER STILL : (Manasty Type) SS

    Model No.: BE-0056

    Wall hanging stainless steel vessel is electrically operated for getting pyrogen fee distilled water.Wall hanging arrangement is provided. Condenser is stainless and fitted with automatic ejection device which operates when water supply is cut off and chamber gets dry. Baffle cup condenser are made of stainless steel sheet.

    Capacity (Approximately) Load
    2 Liters/hour 2 KW
    4 Liters/hour 4 KW
    6 Liters/hour 6 KW
    Enquiry

    WATER STILL : (Barnstead Type)

    Model No.: BE-0057

    Double wall construction, stainless steel walls, condenser and trap & copper pipes in condenser.

    Capacity (Approximately)
    8-9 Liters/hour
    15-16 Liters/hour
    25-26 Liters/hour
    Enquiry

    BLOOD ROLLER MIXER

    Model No.: BE-0058

    We are engaged in delivering a comprehensive range of Blood Roller Mixer.We manufacture these products in the undersigned of our term of qualified professionals.We supply these to our respected clients at economical prices in the market.

    Description:
    1. For thorough mixing of blood samples and cell suspensions
    2. Keeps the contents of closed tubes in gentle motion by rocking while rolling
    3. Compact and ergonomic design
    4. 4 rolls of PVC rods for smooth operation
    5. Can accommodate various sizes of centrifuge & tube

     

    Technical Data:
    Rolling Speed 10 30 RPM
    Rocking frequency 5 Cycles per minute at 35° angle
    No. Of rollers 4
    Dimensions 455 x 265 x 120 mm
    Exterior Body MS Coated
    Rolling Rods Material PVC, each of 320 mm
    Maximum Load 5 kg.
    Supply 220 / 230 V, 50 Hz
    Timer No
    Capacity 4 Roller Mixer
    Enquiry

    WATER BATH SEROLOGICAL

    Model No.: BE-0059

    FEATURES
    1. Double wall
    2. Outer body made of mild steel duly finished in powder
    3. Inner chamber made out of stainless steel sheet of 304 grade .
    4. 30 to 100°C ±0.5°C controlled by thermostat.
    5. To work on 220 VAC
    Size in MM Size in Inches Capacity in Liters
    300 x 300 x 175mm 12 x 12 x 7” 9 Liters
    300 x 250 x 175mm 12 x 10 x 7” 14 Liters
    375 x 300 x 175mm 15 x 12 x 7” 20 Liters
    455 x 300 x 175mm 18 x 12 x 7” 24 Liters
    600 x 300 x 175mm 24 x 12 x 7” 32 Liters
    Enquiry

    HIGH PRECISION WATER BATH

    Model No.: BE-0060

    Double wall construction, inner made out of stainless steel sheet and outer made of mild steel sheet duly finished in stoving enamel paint or powder coated. Glass window provided on opposite sides. A high speed regulated stirrer provided.Temp control is attained by a mercury contact thermometer or digital temperature controller with a Temp. range ambient to 100o C ±1oC.To work on 220 VAC.

    Inner Chamber Size in MM Inner Chamber Size in Inches Capacity in Liters
    425 x 250 x 225mm 17 x 10 x 9” 24 Liters
    450 x 375 x 375mm 18 x 15 x 15” 64 Liters
    600 x 450 x 450mm 24 x 18 x 18” 122 Liters
    600 x 600 x 600mm 24 x 24 x 24” 216 Liters
    Enquiry

    THERMOSTATIC WATER BATH (Rectangular Double Wall)

    Model No.: BE-0061

    Double wall construction, inner made out of stainless steel sheet and outer made of mild controlled by a thermostat. Concentric rings have been provided on holes to accommodated various sizes of container/vessels.To work on 220V AC.

    Size Inside (SS) No. of Holes Capacity in Liters
    300 x 250 x 100mm 6 Holes 75 mm Dia 8 Liters
    350 x 400 x 100mm 12 Holes 75 mm Dia 15 Liters
    OPTIONAL ACCESSORIES :
    1. Digital Temperature controller cum indicator
    2. Low Water cut off
    Enquiry

    WATER BATH RECTANGULAR SINGLE WALL

    Model No.: BE-0062

    Body and rings of stainless steel sheet. It does not have a thermostat.To work on 220V AC.Various sizes are available.

    Size Inside (SS) No. of Holes Capacity in Liters
    300 x 250 x 100mm 6 Holes 75 mm Dia 8 Liters
    350 x 405 x 100mm 12 Holes 75 mm Dia 15 Liters
    Enquiry

    PARAFFIN EMBEDDING BATH

    Model No.: BE-0063

    Double wall construction, inner made out of stainless steel and outer made of mild steel sheet duly finished in powder coating paint.Temp. range ambient to 80ºC ± 1ºC and is controlled by a thermostat with cups and sleeves for glass tube.To work on 220V AC.

    Size
    4 Cups and 6 sleeves
    6 Cups and 8 sleeves
    12 Cups and 8 sleeves
    Enquiry

    UNIVERSAL WATER BATH (Dual Purpose)

    Model No.: BE-0064

    It is a combination of serological and rectangular water bath with holes and concentric rings specification as per both type o baths. Immersion heater attain temperature from ambient to 95ºC ± 1ºC.To work on 220V AC

    Size Inside (SS) Size in Inches Capacity in Liters
    300 x 225 x 175mm 12 x 9 x 7” 14 Liters
    450 x 300 x 175mm 18 x 12 x 7” 25 Liters
    OPTIONAL ACCESSORIES:
    1. Stirring arrangement with stainless steel rod &
    2. Digital PID type indicator-cum-controller.
    3. Low water cut-off
    Enquiry