balaji

HEAT TRANSFER LAB

THERMAL CONDUCTIVITY OF METAL ROD

Model No: BE-TCOMR_9001/01

Experimental setup consisting of :

  • Test rod of copper of 12mm dia. and 200mm long

  • Ring type Heater

  • Cooling chamber of dia 125mm and 50mm long with arrangement for water circulation

  • Shell filled with asbestos insulating powder

  • Set of thermocouples – 6 Nos.

Control panel consisting of :

  • 6 Channel Digital Temp. Indicator range: 0-300oC

  • Dimmerstat : 0-2A / 230V

  • Mains ON/OFF switch

  • Digital Voltmeter 0-250V

  • Digital Ammeter 0-2 A.

THERMAL CONDUCTIVITY OF INSULATION POWDER

Model No: BE-TCOIP_9002/02

Experimental setup consisting of :

  • Mica insulated nichrome Ring type heater

  • Inner copper sphere of radius 100mm

  • Outer copper shphere of radius 200mm

  • Set of thermocouple – 4 Nos.

  • Asbestos Powder is filled in between the outer sphere and inner sphere.

Control panel consisting of :

  • 4 Channel Digital Temp. Indicator range: 0-300oC

  • Dimmerstat : 0-2A /230V

  • Mains ON/OFF switch

  • Digital Voltmeter 0-250V

  • Digital Ammeter 0-2 A.

THERMAL CONDUCTIVITY OF LIQUID

Model No: BE-TCOL_9003/03

Experimental setup consisting of :

  • Commercial glycerol filled between the metal plates of dia 170mm.

  • Disk type heater

  • Cooling chamber with water circulation.

  • Central heat ring.

  • Thermocouple – 4 Nos.

Control panel consisting of :

  • 4 Channel Digital Temp. Indicator range: 0-300oC

  • Dimmerstat : 0-2A / 230V

  • Mains ON/OFF switch

  • Digital Voltmeter 0-250V

  • Digital Ammeter 0-2 A.

PIN FIN IN NATURAL/FORCED CONVECTION

Model No: BE-PFIN_9004/04

Experimental Set up consisting of :

  • Vertical pin of dia 12 and 125mm  long fitted on a heater.

  • Blower unit with orifice of 14mm and manometer arrangement for flow measurement.

  • Duct  of size :  100 X 150 x 500 mm

  • Pin-Fin  : Brass

  • Ring type Heater

  • Set of Thermocouples : Cr/Al – 6 Nos.

Control Panel consisting of :

  • 6  Channel Digital Temp. Indicator range: 0-300oC

  • Dimmerstat : 0-2A / 230V

  • Mains ON/OFF switch

  • Air Blower

  • Digital Voltmeter 0-250V

  • Digital Ammeter 0-2 A.

NATURAL CONVECTION

Model No: BE-NC_9005/05

Experimental Set up consisting of :

  • Brass tube  vertical cylinder of dia 32mm and 500mm long.

  • Duct  of size :  150 X 150 x 500 mm

  • Set of Thermocouple – 6 Nos.

  • Ring type Heater.

Control Panel consisting of :

  • 6 Channel Digital Temp. Indicator range: 0-300oC

  • Dimmerstat : 0-2A /230V

  • Mains ON/OFF switch

  • Digital Voltmeter 0-250V

  • Digital Ammeter 0-2 A.

FORCED CONVECTION (FROM HORIZONTAL CYLINDER)

Model No: BE-FC_9006/06

Experimental Setup consisting of :

  • Horizontal pipe of internal dia 25mm and length 300mm

  • Blower with orifice plate of dia. 15mm and manometer for flow measurement.

  • Long type  heater on test section.

  • Set of Thermocouple – 6 Nos.

Control Panel consisting of :

  • 6  Channel Digital Temp. Indicator range: 0-300oC

  • Dimmerstat : 0-2A / 230V

  • Mains ON/OFF switch

  • Air Blower

  • Digital Voltmeter 0-100/250V

  • Digital Ammeter 0-2 A.

EMMISSIVITY MEASUREMENT APPARATUS

Model No: BE-EMA_9007/07

Experimental Setup consisting of :

  • Test  plate   :  Polished aluminium of dia 125mm

  • Reference plate : black aluminium of dia 125mm

  • Wooden chamber with perspex cover

  • Mica-insulated heaters for black and polished body.

  • Set of Thermocouple – 3 Nos.

Control Panel consisting of :

  • 3  Channel Digital Temp. Indicator range: 0-300oC

  • Dimmerstat  – 2 Nos.  of 0-2A/230V

  • .Mains ON/OFF switch

  • Digital Voltmeter 0-250V

  • Digital Ammeter 0-2 A.

PARALLEL FLOW/COUNTER FLOW HEAT EXCHANGER

Model No: BE-PF_9008/08

Experimental Setup consisting of:

  • Outer tube of inter I.D. 25mm and length 1.2metre.

  •  Inner tube of I.D. 10 mm and length 1.5metr.

  • Thermocouples – 5 Nos.

  • Arrangement for making parallel and counter flow.

Heating arrangement :

  • Cold water storage tank.

  • Hot water stroge tank temp constant through thermostat

  • Electric industrial heater of 2 KW.

Control panel consisting of :

  • 5 Channel Digital Temp. Indicator range: 0-200oC

  • Digital Voltmeter 0-250V

  • Digital Ammeter 0-2A

STEFAN BOLTZMAN APPARATUS

Model No: BE-SBA_9009/09

Experimental setup consisting of :

  • Copper hemi-sphere of dia 200mm enclosed in metal water jacket.

  • Hot water tank with emission heater.

  • Test disc of dia 25mm and weight 5 gm.

  • Set of thermocouple – 3 Nos.

Control panel consisting of :

  • 3-Channel Temperature Indicator 0-200oC

  • Mains ON/OFF switch.

  • Digital Voltmeter 0-250V

  • Digital Ammeter 0-2A

HEAT PIPE DEMONSTRATOR (APPARATUS)

Model No: BE-SBA_9010/10

Experimental Set-up consisting of :

  • Heat pipe made of stainless steel of dia 15mm and 300mm long

  • Two standard pipes : Copper & SS one each of 15mm dia of 300mm long.

  • Heater 200 Watts – 3 Nos.

  • Condenser Tank – 3 Nos.

  • Set of thermocouples – 6 Nos.

Control Panel consisting of :

  • 6 Channel Digital Temp. Indicator range: 0-300oC

  • Dimmerstat : 0-4A / 230 V

  • Digital Voltmeter  : 0-250oC

  • Digital Ammeter    : 0 to 2A

COMPOSITE WALL APPARATUS

Model No: BE-CWA_9011/11

Experimental setup consisting of :

  • Three composite walls Aluminum, Bakelite and wooden of dia 125mm. and 12mm thick.

  • Disk heater ring

  • Central heat ring.

  • Thermocouple – 6 Nos.

Control panel consisting of :

  • 6 Channel Digital Temp. Indicator range: 0-300oC

  • Dimmerstat : 0-2A / 230V

  • Mains ON/OFF switch

  • Digital Voltmeter 0-250V

  • Digital Ammeter 0-2 A.

LAGGED PIPE APPARATUS

Model No: BE-LPA_9012/12

Experimental set-up consisting of :

  • Pipes 3 Nos.

    1stPipe  Daimeter  100mm & 500mm Long

    2nd Pipe Daimeter   75mm & 500mm Long

    3rdPipe  Daimeter   50mm & 500mm Long

  • Nichrome Wire Heater

  •  Set of thermocouples

Control Panel Consisting of :

  • Temperature Indicator 6 channel 0 to 300oC

  • Main ON/OFF switch.

  • Digital Voltmeter 0-23OV

  • Digital Ammeter 0-2A

CRITICAL HEAT FLUX APPARATUS

Model No: BE-CHFA_9012/12

Experimental setup consisting of :

  • Glass trough

  • Stand for glass through

  • Band heater test heater assembly.

  • Thermometer : 0-100oC Magnifying glass.

Control panel consisting of :

  • Digital Ammeter : 0-2A

  • Digital Voltmeter : 0-230V

  • Main ON/OFF switch.

  • Dimmerstat : 0-8A

SHELL AND TUBE HEAT EXCHANGER

Model No: BE-SATHE_9013/13

The unit consisting of :

  • Shell and Tube Heat Exchanger (1:2 pass) shell of M.S. having 150mm dia. length 500mm and thickness of 3mm fitted pipes on 15mm. triangular pitch arrangements. Cut baffles are provided as per TEMA standards.

Heating arrangement :

  • Cold water storage tank.

  • Hot water stroge tank temp constant through thermostat.

  • Electric industrial heater of 2 KW.

Control panel consisting of :

  • 5 Channel Digital Temp. Indicator range: 0-200oC

  • Digital Voltmeter 0-250V    

  • Digital Ammeter 0-2A

  • Knob to adjust the temperature of thermostat.  

STUDY OF DROP-WISE AND FILM-WISE EXPERIMENTAL SETUP

Model No: BE-SODWAFWES_9014/14

The unit consisting of :

  • Steam generator : 4 lit. capacity.

  • Copper tube with two different surface thickness.

  • Condensate measuring cylinder with stop watch

  • Electrical heater for steam generator 2 KW

  • 5 channel digital temperature indicator

  • Steam trap – 1 No.

  • Set of thermocouples

  • 5 way selector switch power supply socket etc.