Instrumentation Labs
CENTRIFUGAL PUMP TEST RIG
Model No: BE-CPTR_9001/01
Specifications :
Centrifugal pump of 25x25mm coupled to 1 H.P. A.C. motor (1400 RPM).
Sump tank of size 105 Ltr.
Discharge measurement tank of size 40 Ltr.
Pressure Gauge, Range: 0-4 Kg/cm2
Vacuum Gauge, Range: 0-760 mm/hg
Control Valve to control discharge.
Experimental capability :
ElectroniceEmergy meter
DPDT Switch
Lockable wheels are provided on all four legs.
Range of Experiment :
To determine the efficiency of pump.
Discharge V/s Total head
Discharge V/s Input power
Discharge V/s Output power
Discharge V/s Efficiency of pump
Discharge V/s Overall efficiency
RECIPROCATING SINGLE STAGE PUMP TEST RIG
Model No: BE-RSSPTR_9002/02
Specifications :
Reciprocating pump of 25x25mm coupled to ½ H.P. A.C. motor (1400 RPM).
Sump tank of size 105 Ltr.
Discharge measurement tank of size 40 Ltr.
Pressure Gauge, Range: 0-4 Kg/cm2
Vacuum Gauge, Range: 0-760 mm/hg
Control Valve to control discharge.
Control Panel :
ElectroniceEmergy meter
DPDT Switch
Lockable wheels are provided on all four legs.
Range of Experiment :
To determine the efficiency of pump.
Discharge V/s Total head
Discharge V/s Input power
Discharge V/s Output power
Discharge V/s Efficiency of pump
Discharge V/s Overall efficiency
GEAR PUMP TEST RIG / OIL PUMP TEST RIG
Model No: BE-GPTR_9003/03
Specifications :
Gear oil pump of 25x25mm coupled to ½ H.P. A.C. motor (1400 RPM).
Sump tank of size 105 Ltr.
Discharge measurement tank of size 40 Ltr.
Pressure Gauge, Range: 0-4 Kg/cm2
Vacuum Gauge, Range: 0-760 mm/hg
Control Valve to control discharge.
Experimental capabilities:
To determine the loss coefficient for different type of fittings.
Comparison of pressure drops across two different types.
Control Panel :
ElectroniceEmergy meter
DPDT Switch
Lockable wheels are provided on all four legs.
Range of Experiment :
To determine the efficiency of pump.
Discharge V/s Total head
Discharge V/s Input power
Discharge V/s Output power
Discharge V/s Efficiency of pump
Discharge V/s Overall efficiency
PELTON WHEEL TURBINE TEST RIG (Capacity: 1 KW)
Model No: BE-PFIN_9004/04
Specifications:
This Pelton Turbine Test Rig 50mm size to develop 1 KW at 1000 RPM with a flow of about 450 lpm at 25 meters supply head.
- Supply pump set suitable for supplying water to the above turbine
Monoblock Centrifugal Pump : Kirloskar Make (3 HP, 3 Phases, 440V)
Pump Size : Suction size 65mm & Delivery size 50mm
Pump Discharge : 420 LPM
Delivery Head : 27 meter
RPM : 3000 RPM
Sump Tank: Fibre glass lined S.S Tank to store sufficient water for independent circulation through the unit experimentation and arrange within the floor space of main unit. Capacity 650Liter.
Runner coupled to pelton wheel. Rope Bake Dynamometer is used to measure the output. Runner diameter 220mm
Spring Balance 10 kg (Salter Make).
Orificemeter of 32mm is used to measure the flow rate of water through pressure gauge difference.
Discharge control valve, by-pass valve of 50mm (ISI mark) used to control the flow rate of water.
Pressure Gauge of 4 kg/cm2 is used to measure the pressure head.
Rigid MS frame work compactly fitted with all the above items as a self-sufficient package unit suitable for operation without any foundation.
Starter suitable for above motor pump set mounted on the control panel board.
Lockable wheels are provided on all four legs.
Experimental Capabilities:
To determine the efficiency of Turbine
To draw the characteristics curve of Turbine.
FRANCIS TURBINE TEST RIG (Capacity: 1 KW)
Model No: BE-FTTR_9005/05
Specifications :
This Francis Turbine Test Rig 150mm size to develop 1 KW at 1250 RPM with a flow of about 1400 lpm at 20 meters supply head.
Supply pump set 80x80mm size, 1500 lpm at 20 meter head suitable for supplying water to the above turbine.
MonoblockCentrifugel Pump : Kirloskar Make (5 HP, 3 Phases, 440V)
Pump Size : Suction size 65mm& Delivery size 80mm
Pump Dischrge : 1200 LPM
Delivery Head : 20 meter
RPM : 3000 RPM
Sump Tank :Fibre glass lined S.S Tank to store sufficient water for independent circulation through the unit experimentation and arrange within the floor space of main unit. Capacity 650 Liter.
Rope Bake Dynamometer is used to measure the output. Spring balance and dead weights are used to measure the load. Runner Diameter 220mm
Orificemeter of 53mm is used to measure the flow rate of water through pressure gauge difference.
Discharge control valve, by-pass valve of 3″ (ISI mark) used to control the flow rate of water.
Spring Balance 25 kg &10 Kg (Salter Make)
Pressure Gauge of 4 kg/cm2 is used to measure the pressure head.
Rigid MS frame work compactly fitted with all the above items as a self-sufficient package unit suitable for operation without any foundation.
Switch and starter suitable for above motor pump set mounted on the control panel board.
Experimental Capabilities :
To determine the efficiency of Turbine
To draw the characteristics curve of Turbine.
KAPLAN TURBINE TEST RIG (Capacity: 1 KW)
Model No: BE-KTTR_9006/06
Specifications :
This Kaplan Turbine Test Rig 150mm size to develop 1 KW at 1250 RPM with a flow of about 1250 lpm at 15 meters supply head.
Supply pump set 100x100mm size, 1500 lpm at 10 meter head suitable for supplying water to the above turbine.
MonoblockCentrifugel Pump : Kirloskar Make (5 HP, 3 Phases, 440V)
Pump Size : Suction size 80mm & Delivery size 80mm
Pump Dischrge : 1200 LPM
Delivery Head : 15 meter
RPM : 3000 RPM
Sump Tank :Fibre glass lined S.S Tank to store sufficient water for independent circulation through the unit experimentation and arrange within the floor space of main unit. Capacity 650 Liter.
Rope Bake Dynamometer is used to measure the output. Spring balance and dead weights are used to measure the load. Runner Diameter 220mm
Orificemeter of 66mm is used to measure the flow rate of water through pressure gauge difference.
Discharge control valve, by-pass valve of 4″ (ISI mark) used to control the flow rate of water.
Spring Balance 25 Kg & 10 Kg (Salter Make)
Pressure Gauge of 4 kg/cm2 is used to measure the pressure head.
Rigid MS frame work compactly fitted with all the above items as a self-sufficient package unit suitable for operation without any foundation.
Switch and starter suitable for above motor pump set mounted on the control panel board.
Lockable wheels are provided on all four legs.
Experimental Capabilities :
To determine the efficiency of Turbine
To draw the characteristics curve of Turbine.
Experimental Capability :
To verify the Bernoulli’s Theorem experimentally.
HYDRAULIC RAM (CLOSED CIRCUIT)
Model No: BE-RA_9007/07
Specifications:
It consists of a suitable size centrifugal pump 2 H.P. A Motor to make the supply from sump tank to supply tank. This apparatus consists of fibre coated MS sump tank of suitable capacity.
Supply Tank :Fibre coated SS tank fixed on angle frame &Capacity 650 Liter..
Measuring tanks : Two fibre coated SS tank fitted with piezometric tube to measure the waste water and useful water. Air vessel is provided to perform the phenomena of water hammer. A pressure gauge is fitted on useful water pipe line to measure the head of water.
Lockable wheels are provided on all four legs.
Experimental capability.
To determine the following efficiency of hydraulic ram :
Rankine’s efficiency
D’Aubuisson’s efficiency
To find the cavitation number of the flow.
HYDRAULIC TILTING FLUME - 4 METER
Model No: BE-HTF_9008/08
Water tank capacity of size 300 Ltr.
Discharge measurement tank of size 60 Ltr.
Monoblock Centrifugal Pump2 HP, 3 Phases (Kirlosker Make) Hook gauge 30cm length fitted on a trolley & arrangement for transverse and longitudinal movement should be supplied. Pipe line to carry water to flume and foot valve at suction end provided. Centrifugal pump set for supplying water to the flume provided with epoxy painted inside to prevent rust hence increase the life of tank for total rust protection.
Lockable wheels are provided on all legs.
Experiment Consisting of:
- To determine Co-efficient of roughness nfor a given flume.
- To Calibrate a broad-crested weir and study the pressure distribution at the upstream end of the weir.
- To study characteristics of Hydraulic Jump.