Balaji Enterprises New Delhi :- equipments in bangalore, equipments in chennai, equipments in hyderabad, manufacturers of rock testing lab equipment in chennai, rock testing lab equipment manufacturers in hyderabad

LABORATORY EQUIPMENT INSTRUMENTS

AUTOCLAVE (Portable)

Model No.: BE-0023

Made of aluminum or stainless steel, having 63mm pressure gauge, stopcock, additional
safety valve, steam release valve container and stand electrical

Sizes in MM	In Liters Capacity
300 x 300mm	20 Liters
300 x 375mm	25 Liters

VERTICAL AUTOCLAVE DOUBLE WALL

Model No.: BE-0024

A versatile, electrically heated sterilizer under saturated steam of adjustable pressure of
10 to 20 psi. Double walled construction with boiler & steam jacket made of thick
stainless steel and gap is filled with high grade glass wool to bring the temperature loss to
a minimal level.The outer chamber is made out of thick stainless steel.The lid is made of
thick stainless steel plate (joint less) and can be sealed by a joint less neoprene rubber
gasket by wing nuts through hinged bolts by engaging slotted lugs on rim of the cover.
Provided with wingnut (brass nut) dial pressure gauge, air/stam release cock, water level
indicator, sprint loaded safety valve adjustable to any required point from 10 psi to 20 psi
with accuracy ±3 psi.A drain cock has also been provided.A double safety valve has also
been provided along with inlet. Supplied complete in stainless steel and stainless steel
dressing bins.

Inner Dimension	Dimension of Basket	Capacity	Heater Load
250 x 450mm	225 x 300mm	22 Ltrs.	2.0 KW
300 x 500mm	275 x 350mm	40 Ltrs	2.0 KW
350 x 550mm	325 x 400mm	50 Ltrs.	3.0 KW
400 x 600mm	375 x 450mm	78 Ltrs.	4.0 KW
450 x 600mm	425 x 450mm	98 Ltrs.	4.0 KW
550 x 750mm	525 x 600mm	187 Ltrs.	4.0 + 1.0KW

VERTICAL HIGH PRESSURE AUTOCLAVE TRIPLE WALL

Model No.: BE-0025

Triple wall construction i.e. working chamber, water chamber and outer jacket made
from high grade stainless steel with mirror finish. Lid made of heavy duty stainless steel
plate. Having appropriate pressure gauge, stop cock, safety device, steam release valve,
water inlet and outlet valves. Fitted with water level indicator and comes with stainless
steel basket & low water cutoff device & pressure control switch.

Sizes in MM	Sizes in Inches	In Liters Capacity	Load
250 x 450mm	10 x 18”	22 Liters	2 KW
300 x 500mm	12 x 20”	40 Liters	2 KW
350 x 550mm	14 x 22”	50 Liters	3 KW
400 x 600mm	16 x 24”	78 Liters	4 KW
450 x 600mm	18 x 24”	98 Liters	5 KW
550 x 750mm	22 x 30”	152 Liters	6 KW

HORIZONTAL HIGH PRESSURE AUTOCLAVE DOUBLE WALL

Model No.: BE-0026

Cylindrical (Double Walled) Inner and outer chamber made of thick SS fitted with
automatic pressure control switch, low water cutoff device, digital temperature
controller cum indicator with inbuilt timer vacuum breaker

Sizes in MM	In Liters Capacity	Load
400 x 600mm	78 Liters	6 KW
400 x 1100mm	162 Liters	9 KW
500 x 900mm	165 Liters	9 KW
500 x 1200mm	221 Liters	9 KW

OPTIONAL ACCESSORIES:

1. 96×200 controller RTD input/low water cut off input/SSR, Relay input and out for
2. Pressure Transmitter for autoclave (pressure sensor)
3. Rs. 485 data serial port + data recorder.
4. Thermal printing for autoclave.
heater. Changeable purging and sterilizing range/pressure input controller
special for Horizontal Autoclave

HORIZONTAL HIGH PRESSURE AUTOCLAVE TRIPLE WALL

Model No.: BE-0027

Cylindrical (Triple Walled) Inner and outer chamber made of thick SS ﬁtted withautomatic pressure control switch, low water cutoff device, digital temperature controller cum indicator with inbuilt timer vacuum breaker, automatic self locking safety door, moisture trap, purging on/off system and multiport valve.

Chamber Sizes in MM	Chamber Sizes in Inches	Capacity	Load
400 x 600mm	16 x 24”	78 Liters	6 KW
400 x 1100mm	16 x 36”	162 Liters	9 KW
400 x 1100mm	16 x 36”	162 Liters	9 KW
500 x 1200mm	20 x 48”	221 Liters	9 KW

OPTIONAL ACCESSORIES:

1. 96×200 controller RTD input/low water cut off input/SSR, Relay input and out for heater. Changeable purging and sterilizing range/pressure input controller special for Horizontal Autoclave.
2. Pressure Transmitter for autoclave (pressure sensor)
3. Rs. 485 data serial port + data recorder.
4. Thermal printing for autoclave.

RECTANGULAR HIGH PRESSURE AUTOCLAVE

Model No.: BE-0028

Chamber Sizes in MM	Chamber Sizes in Inches	Capacity	Load
450 x 450 x 900mm	18 x 18 x 36”	180 Liters	6 KW
450 x 600 x 900mm	18 x 24 x 36”	240 Liters	9 KW
600 x600 x 900mm	24 x 24 x 36”	320 Liters	9 KW
600 x 600 x 1200mm	24 x 24 x 48”	430 Liters	9 KW

OPTIONAL ACCESSORIES:

96×200 controller RTD input/low water cut off input/SSR, Relay input and out for heater. Changeable purging and sterilizing range/pressure input controller special for Horizontal Autoclave.
Pressure Transmitter for autoclave (pressure sensor)
485 data serial port + data recorder.
Thermal printing for

LAMINAR AIR FLOW CABINET HORIZONTAL

Model No.: BE-0029

Laminar ﬂow principle involves double ﬁltration of air through pre-ﬁlters (upto 5 microns) and hepa ﬁlters (down to 0.3 microns) for ﬁlteration of biological and particulate contaminants unidirectional air ﬂow is drawn from atmosphere and passed through pre and hepa ﬁltered on to the work surface.Table top covered with laminated sheet or SS sheet (optional) side panels are ﬁxed and are made out of transparent acrylic sheet. Front door is also made of acrylic sheet. Superior motor is used for blower. Unit is supplied with manometer, UV tube, ﬂuorescent lighting tubes.

Internal Work zone Dimension (LxDxH) Feet	Wooden	Mild Steel	Stainless Steel
2’ x 2’ x 2’
3’ x 2’ x 2’
4’ x 2’ x 2’
6’ x 2’ x 2’

OPTIONAL ACCESSORIES:

Magnehelic Gauge (To track ﬁlter pressure) in lieu of static pressure
Microprocessor LCD Controller with Auto Switch off mode for motor blower when door is closed. Digital buzzer timer sounds an audio alarm in completion of sterilizing time of the chamber and the switches off V. germicidal tune and automatically switches ON the ﬂuorescent light, alerting the user that the bench is ready for use.
Digital timer for V. Light & blower

LAMINAR AIR FLOW VERTICAL

Model No.: BE-0030

Internal Work zone Dimension (LxDxH) Feet	Wooden	Mild Steel	Stainless Steel
2’ x 2’ x 2’
3’ x 2’ x 2’
4’ x 2’ x 2’
6’ x 2’ x 2’

OPTIONAL ACCESSORIES:

Magnehelic Gauge (To track ﬁlter pressure) in lieu of static pressure
Microprocessor LCD Controller with Auto Switch off mode for motor blower when door is closed. Digital buzzer timer sounds an audio alarm in completion of sterilizing time of the chamber and the switches off V. germicidal tune and automatically switches ON the ﬂuorescent light, alerting the user that the bench is ready for use.
Digital timer for V. Light & blower

FUME HOOD

Model No.: BE-0031

Fume exhaust hoods are designed to contain and throw out toxic, obnoxious pungent smelling gases to protect personal and equipment in the laboratories. A motor driven blower creates negative pressure and sucks contaminated air from work areas and throws it in high up atmosphere through ducting. Fabricated out of thick ply board clad from outside with laminated sheet and inside ﬁnished in non-corrosive epoxy paint. An up-down sliding sash with glass sheet is provided. Flurescent lighting is also provided. A gas tap, water tap and wash basin is also provided.

Internal Work zone Dimension (LxDxH) Feet	Wooden	Mild Steel	Stainless Steel
3’ x 2’ x 2’
4’ x 2’ x 2’
5’ x 2.5’ x 2.5’
6’ x 2’ x 2’

OPTIONAL ACCESSORIES:

Magnehelic Gauge (To track ﬁlter pressure) in lieu of static pressure
Microprocessor LCD Controller with Auto Switch off mode for motor blower when door is closed. Digital buzzer timer sounds an audio alarm in completion of sterilizing time of the chamber and the switches off V. germicidal tune and automatically switches ON the ﬂuorescent light, alerting the user that the bench is ready for use.
Digital timer for V. Light & blower

BIOLOGICAL SAFETY CABINET

Model No.: BE-0032

Offered here is an exhaustive range of Biological Safety Cabinets in class II/Type 2 that are designed for universities, research laboratories, pharmacies and pharmaceuticals companies to protect both users and procedures from contamination when workingwith biological ﬁelds.These are extensively used in protecting the operator from cross contamination of samples and primary containment of the bio hazardous materials being used. It operates with minimum airﬂow velocity of 100 fpm (0.5 m/s) through face opening.

Internal Workzone Dimension (LxDxH) Feet	Size of Hepa Filter	No. of Hepa Filter	Illumination
2’ x 2’ x 2’	2’ x 2’ x 6’	1	1 x 20W
3’ x 2’ x 2’	3’ x 2’ x 6’	1	1 x 20W
5’ x 2.5’ x 2.5’	4’ x 2’ x 6’	2	1 x 30W

Internal Work zone Dimension (LxDxH) Feet	Wooden	Mild Steel	Stainless Steel
3’ x 2’ x 2’
4’ x 2’ x 2’
5’ x 2.5’ x 2.5’

OPTIONAL ACCESSORIES:

Microprocessor Controller with door position alarm with Auto Switch off mode for motor blower when door is Digital buzzer timer sounds an audio alarm on completion of sterilizing time of the chamber and the switches off U.V. germicidal tune and automatically switches ON the ﬂuorescent light, alerting the user that the bench is ready for use.
Magnehelic Gauge
Digital timer for UV light & blower
Digital air velocity/ﬂow meter

PASS BOX STATIC

Model No.: BE-0033

Static Pass Box made of stainless steel 304 grade, double walled, complete with magnetic interlocking system on two doors, U.V light, ﬂuorescent light.

Working Chamber Size

18”x18”x18”

24”x24”x24”

36”x36”x36”

PASS BOX DYNAMIC

Model No.: BE-0034

Dynamic Pass Box made of stainless steel 304 grade, double walled, ﬁtted with magnetic interlocking system on two doors. Complete with motor blower and HEPA ﬁlter’ magnehelic gauge for pressure, ﬂourescent light, UV light for germinal free area.

Working Chamber Size

18”x18”x18”

24”x24”x24”

36”x24”x24”

36”x36”x36”

INDUSTRIAL AIR CURTAIN

Model No.: BE-0035

Offered by us are superior qualities industrial air curtains are used to create a curtain of air between air-conditioned and clean room to adjoining room.Widely used in various industries like, hospitals, hotels, and showrooms etc, these quality-tested Air Curtains are offered in varied speciﬁcations and that too at very affordable prices.This high end machinery ably creates an invisible barrier of high velocity air which provides complete protection against insects, dust, dirt and fumes.

Door Width

900mm

1200mm

1500mm

INFRARED MOISTURE BALANCE

Model No.: BE-0036

A basic method for determination of moisture content, measure moisture percentage by weight and drying simultaneously. Infra Red radiation are radiation are reﬂector by a bulb and its Temperature is controlled by a regulator.The balance scale is divided in terms of moisture content on net weight basis.

Speciﬁcation:

Range Accuracy	0-100%
Dimension	38x35x38cm.
Weight	20 kgs. Approx
A.C. Mains	220V 50Hz

HOT AIR UNIVERSAL OVEN (MEMMERT TYPE)

Model No.: BE-0037

Standard double wall construction. Outer made of mild steel duly enamel painted or powder coated paint, inner made out of anodized aluminum or stainless steel sheet. Heating elements provided at bottom & two sides temperature controlled by hydraulic type of thermostat or Digital temperature controller.Temperature +5°C Ambient to 250°C with accuracy ±1°C.To work on 220V.

Internal Dimension (in millimeters)	Capacity	Heat Load	No. of Shelves
300 x 300 x 300	28 Ltrs.	0.75 KW	2
355 x 355 x 355	45 Ltrs.	0.75 KW	2
455 x 455 x 455	95 Ltrs.	1.50 KW	2
455 x 455 x 605	125 Ltrs.	1.50 KW	2
605 x 605 x 605	252 Ltrs.	2.25 KW	3
605 x 605 x 910	336 Ltrs.	2.25 KW	3
605 x 910 x 910	500 Ltrs.	3.75 KW	3
910 x 910 x 910	750 Ltrs	4.5 KW	3

OPTIONAL ACCESSORIES:

Air circulation fan
Microprocessor PID Temperature Controller-cum-indicator in LED

HOT AIR UNIVERSAL OVEN - DELUXE MODEL

Model No.: BE-0038

Standard double wall construction. Outer made of mild steel duly enamel painted or powder coated paint, inner made out of stainless steel sheet. Heating elements provided at bottom & two sides.

Temperature Range : +5°C Ambient to 250°C Temperature Accuracy :+1Co Forced Convection : Available with forced convection system (Standard Features). Temperature Controller : Microprocessor based Digital Temperature Indicator-cum-controller with in following features

Digital 16×2 alhpa numeric jumbo LCD display
Digital temperature control and display
Digital timer with enable /disable feature
Temperature overshoot and process complete alarm Automatic fan On/off function, On/Off timer for fan motor for better & long life of fan motor.

Temperature Display : Through Digital Indicator

Internal Dimension (in millimeters)	Capacity	Heat Load	No. of Shelves
300 x 300 x 300	28 Ltrs.	0.75 KW	2
355 x 355 x 355	45 Ltrs.	0.75 KW	2
455 x 455 x 455	95 Ltrs.	1.50 KW	2
455 x 455 x 605	125 Ltrs.	1.50 KW	2
605 x 605 x 605	252 Ltrs.	2.25 KW	3
605 x 605 x 910	336 Ltrs.	2.25 KW	3
605 x 910 x 910	500 Ltrs.	3.75 KW	3
910 x 910 x 910	750 Ltrs	4.5 KW	3

OPTIONAL ACCESSORIES:

Communication Port for PC Interface, complete with Communication cable with USB Interface
Digital Micro controller with Ramp and Soak Facility Proﬁler
Fuzzy Logic Control PLC-HMI

OVEN INDUSTRIAL (Drier)

Model No.: BE-0039

Double wall construction body is fabricated on heavy duty angle channel frame outer & inner made of Mild Steel sheet.The Gap between the two wall of 75mm is ﬁlled with high temperature resistant glass wool.Temperature range ±10ºAmbient to 300º C controlled by digital temperature controller cum indicator with inbuilt timer.

Size in mm	Size in Inches
900 x 600 x 600	36 x 24 x 24”
1200 x 900 x 600	48 x 24 x 24”
900 x 900 x 900	36 x 36 x 36”
1200 x 900 x 900	48 x 36 x 36”
1200 x 1200 x 1200	60 x 36 x 36”
1800 x 900 x 900	72 x 36 x 36”
1800 x 975 x 975	72 x 39 x 39”
1800 x 1200 x 1200	72 x 48 x 48”
2400 x 1200 x 1200	96 x 48 x 48”

OPTIONAL ACCESSORIES:

Digital Temperature Controller Cum

Digital

Microprocessor based Digital Temperature controller

with inbuilt timer in LCD with temperature over shoot alarm.

BOTTLE DRIER

Model No.: BE-0040

Standard double wall body and double door provided with digital temperature controller both sides opening. Forced air blower also provided.Temperature range to 200ºC ± 5C for 18 x 15 x 6” crates.

Size
For 8 Crates	18 x 5 x 6”
For 10 Crates	18 x 5 x 6”
For 12 Crates	18 x 5 x 6”
For 16 Crates	18 x 5 x 6”
For 20 Crates	18 x 5 x 6”
For 24 Crates	18 x 5 x 6”

OPTIONAL ACCESSORIES:

Digital Temperature Controller Cum Indicator
Digital Timer
Rack for Bottle

TRAY DRIER

Model No.: BE-0041

Body is fabricated on heavy duty angle channel frame with outer body made of Mild Steel sheet dully painted in hammer tone paint or in powder coating paint and inner body made of Stainless Steel sheet.The 75mm gap between the two walls will be ﬁlled by high grade temperature resistant glass wool as a insulation. Air circulation fan blade motor is given to circulate the heat in the chamber and to maintain equal temperature on all sides. Temperature range +5ºC ambient to 200ºC controlled by digital temperature controller cum indicator with a high class panel attached on the body

Size of Drier	Tray Size
For 12 Tray Provision	16x32x1¼ “
For 24 Tray Provision	16x32x1¼ “
For 36 Tray Provision	16x32x1¼ “
For 48 Tray Provision	16x32x1¼ “
For 96 Tray Provision	16x32x1¼ “

VACUUM OVEN

Model No.: BE-0042

Double walled fabrication, outer made of heavy duty mild steel and inner made of heavy stainless steel. Exterior ﬁnished in stoving enamel paint or powder coated paint.
Temperature range ambient to 130ºC ± 2ºC controlled by hydraulic thermostat or digital temperature controller. Capable with stand vacuum to 760mm hg. workable on 220V AC. see through end glass window provided.Vacuum gauge also provided along with a shelf.

Size of Chamber in MM	Capacity
300 x 300mm	22 Ltr.
300 x 600mm	44 Ltr.
250 x 250 x 250mm	16 Ltr.
300 x 300 x 300mm	28 Ltr.
455 x 455 x 455mm	95 Ltr.

BACTERIOLOGICAL INCUBATORS (Memmert Type)

Model No.: BE-0043

Standard Double wall construction inner body made of high grade aluminum sheet or
Stainless Steel and outer body made of mild steel sheet duly painted in powder coated
paint.The gap between the two wall will be filled by high grade glass wool of 75mm to
avoid thermal loss. Bided Heating elements are placed in bottom and two sides (Ribs)
made of kanthal.Aone wire (best quality wire in India) Chamber is provided with groves
to hold shelves and to adjust shelves according to the requirement temperature range
+5ºC ambient to 90ºC controlled by thermostat.To work on 220/230V AC. Comes with
two aluminum shelves.

Size in MM	Size in Inches	No. of Shelves
300 x 300 x 300mm	12 x 12 x 12”	2
355 x 355 x 355mm	14 x 14 x 14”	2
400 x 400 x 400mm	16 x 16 x 16”	2
455 x 455 x 455mm	18 x 18 x 18”	2
605 x 455 x 455mm	24 x 18 x 18”	2
605 x 605 x 605mm	24 x 24 x 24”	2
910 x 605 x 455mm	36 x 24 x 18”	2
910 x 605 x 605mm	36 x 24 x 24”	2
910 x 910 x 910mm	36 x 36 x 36”	2

BACTERIOLOGICAL INCUBATORS DELUXE MODEL

Model No.: BE-0044

Standard Double wall construction inner stainless steel & outer body made of mild steel duly powder coated.The gap between the two wall will be filled by high grade glass wool of 75mm to avoid thermal loss. Bided heating elements are placed in bottom and two sides (Ribs) made of kanthal a one wire (best quality wire in India). Chamber is provided with groves to hold shelves and to adjust shelves according to the requirement. Temperature range +5ºC ambient to 90ºC controlled by Microprocessor Based PID type digital controller cum indicator with following features
Digital 16×2 alpha numeric jumbo LCD display.
Digital temperature control and display
Digital timer with enable/disable features.
Temperature overshot and process completer alarm.
Auto fan on/off function.
To work on 220/230V AC.

Size in MM	Size in Inches	No. of Shelves
300 x 300 x 300mm	12 x 12 x 12”	2
355 x 355 x 355mm	14 x 14 x 14”	2
400 x 400 x 400mm	16 x 16 x 16”	2
455 x 455 x 455mm	18 x 18 x 18”	2
605 x 455 x 455mm	24 x 18 x 18”	2
605 x 605 x 605mm	24 x 24 x 24”	2
910 x 605 x 455mm	24 x 24 x 24”	2
910 x 605 x 605mm	36 x 24 x 24”	2
910 x 605 x 455mm	36 x 24 x 18”	2
910 x 605 x 605mm	36 x 24 x 24”	2
910 x 910 x 910mm	36 x 36 x 36”	2

B.O.D. INCUBATOR

Model No.: BE-0045

Double walled construction, inner made out of highly polished stainless steel sheet,
outer made of mild steel sheet duly finished in stoving enamel paint or powder coating
pain provided with magnetic gasket. Inner door is made of transparent acrylic sheet or
operated inner illumination has been provided. Castor wheels are also provided.
Temperature range 5ºC to 50ºC ± 1ºC is controlled by digital temp. Controller cum
indicator standard cooling unit is installed for low temperature working, inner air
circulation system also provided.A control panel with indicators equipment to work on
220V AC.

Inner Dimension in MM	Capacity	Volume	No. of Shelves
350 x 350 x 400mm	64 Ltrs.	2.0 Cuft.	2
455 x 410 x 610mm	112 Ltrs.	4 Cuft	2
505 x 415 x 830mm	171 Ltrs	6.1 Cuft	2
570 x 550 x 875mm	280 Ltrs.	10 Cuft.	3
650 x 580 x 900mm	340 Ltrs.	12 Cuft.	3
650 x 650 x 950mm	425 Ltrs	15 cuft.	3

ORBITAL SHAKING INCUBATOR (B.O.D.Type)

Model No.: BE-0046

Standard double construction. Exterior made out of mild steel sheet duly finished in
powder coating paint. Inner chamber made of highly polished stainless steel sheet.
Double door with glass window. Inter changeable platform has been provided temp.
range 5ºC to 60ºC ± 1ºC is controlled by a digital controller.Variable speed control
regulator to control speed upto 200 rpm provided.

Capacity

9 x 500/250ml Flasks

16 x 500/250ml Flasks

24 x 500/250ml Flasks

Temperature Control : Microprocessor Based Digital Temperature Indicator-cum-Controller with digital RPM indicator.

OPTIONAL ACCESSORIES:

1. Communication Port with interface and data cable for temperature to download data to your PC.
2. Spare lotus clamps made of S.S on trays

DRY BATH INCUBATOR

Model No.: BE-0047

Digital, 24 holes for 12mm tubes, +5°C above ambient to 70°C.Temperature sensor PT- 100. Maximum heating power 125W,Temperature Controller PID,Timer 1 min to 99 minutes, LCD Display for time & temperature, Anodized Aluminum block 220V AC, Available with Buzzer alarm & overheat protection.

BLOOD BANK REFRIGERATOR

Model No.: BE-0048

Double wall fabrication with inner chamber of highly polished stainless steel sheet and external one is made of mild steel sheet duly ﬁnished in stowing enamel.Temp. is maintained from 4°C to 6°C by digital temperature controller-cum-indicator and triggers the audio visual alarm in event of ﬂuctuation. Cooling is achieved by hermetically sealed compressor unit.To work on 220V AC.

Capacity (In Liters)	No. of Bags
85 Liters	50 Blood Bags
165 Liters	110 Blood Bags
200 Liters	200 Blood Bags
280 Liters	250 Blood Bags
400 Liters	360 Blood Bags

MORTUARY CHAMBER

Model No.: BE-0049

Double wall construction inner stainless steel and outer mild steel duly painted with rust proof paint.Trays travel on rollers ﬁtted with ball bearing, trays made of stainless sheet to carry bodies are provided with handles.Temperature Range 2C to 5°C controlled by digital temperature controller cum indicator to work on 220 Volts AC Supply.

Capacity	Temp.	Voltage Stabilizer
Single Body	2° to 5°C	3 KVA
Two Bodies	2° to 5°C	4 KVA
Three Bodies	2° to 5°C	5 KVA
Four Bodies	2° to 5°C	8 KVA
Six Bodies	2° to 5°C	8 KVA

OPTIONAL ACCESSORIES:

Automatic voltage stabilizer.

HUMIDITY CHAMBER

Model No.: BE-0050

Standard double wall construction inner chamber made out of highly polished stainless steel sheet outer made of mild steel duly painted in powder coated paint or stoving paint. Temperature range 5ºC to 55ºC ± 2ºC and humidity from 55% to 95% ±3% Rh. Stainless steel water reservoirs heated by immersion heaters provide humidity complete with all accessories

Inner Chamber Size (In mm)	Capacity
455 x 455 x 455 mm	95 Liters
455 x 455 x 710 mm	147 Liters
605 x 605 x 605 mm	335 Liters

OPTIONAL ACCESSORIES:

Digital Temperature Controller Cum
Automatic electronic controller with digital display for & humidity combined.
Low water cut-off

ENVIRONMENTAL CHAMBER (Humidity Cabinet Delux)

Model No.: BE-0051

Suitable for carrying out different quality control tests under controlled conditions of temperature and humidity.
The excellent quality of door packing for the external
User oriented design of shelves makes you adjust each space of shelves without difﬁculty.
Inner chamber and trays are made of stainless steel (S.S.-304 Grade)
Outer wall of mild steel sheet duly powder
Mounted on caster wheels for easy
High grade glass wool insulation between outer and inner chamber for minimal thermal loss.
Front double walled door is provided with lock and key
A self-cooled air circulation fan is ﬁtted to maintain uniform temperature and humidity conditions throughout the chamber.

Inner Dimension in MM	Capacity	Volume	No. of Perforated Tray
455 x 410 x 610mm	112 Ltrs	4.0 Cuft.	2
505 x 415 x 830mm	171 Ltrs	6.1 Cuft.	2
605 x 605 x 605mm	224 Ltrs.	8.0 Cuft.	2
570 x 550 x 875mm	280 Ltrs	10.0 Cuft.	3
650 x 580 x 900mm	340 Ltrs.	12.0 Cuft.	3
700 x 640 x 900mm	420 Ltrs	15.0 Cuft.	4

OPTIONAL ACCESSORIES:

Communication Port with interface and data cable to download to your PC with PLC & HMI.

DEEP FREEZER, -20°C & -40°C

Model No.: BE-0052

Double wall construction with PUF insulation between inner and outer wall. Refrigeration system through hermitically sealed compressor inner high grade stainless steel outer made of mild steel sheet duly painted in powder coated paint.Temperature range upto-20°C controlled by microprocessor based digital temperature controlled cum indicator.

Capacity	Size in Inches
4 Cubic Feet	15”x20”x24”
6 Cubic Feet	20”x16”x34”
10 Cubic Feet	22”x22”x36”
12 Cubic Feet	26”x23”x36”
15 Cubic Feet	48”x 26”x 26”

OPTIONAL ACCESSORIES:

Automatic voltage stabilizer.

STABILITY CHAMBER

Model No.: BE-0053

Standard Double wall construction inner/outer chamber made out of highly polished stainless steel sheet of 304 grade.Temperature range 10°C to 60°C ± 0.5°C and humidity from 35% to 95% or less RH controlled by Microprocessor based PID type digital controlled with following features :

Digital LCD
Microprocessor based PID temperature controller cum
Microprocessor based PID humidity controller cum
Low water cut
Auto dehumidiﬁed for better
Temperature and humidity overshoot alarm temperature below ambient is controlled by a sealed Stainless steel reservoirs heated by immersion heaters provide humidity complete with all accessories.
Comes with 21 CFR

Inner Chamber Size (In Inches)	Capacity
21” x 18” x 18”	125 Ltrs.
24” x 24” x 24”	225 Ltrs.
36” x 24” x 24”	336 Ltrs.
48” x 26” x 26”	500 Ltrs
15 Cubic Feet	1000 Ltrs.

MUFFLE FURNACE (Laboratory Model)

Model No.: BE-0054

Outer shell made out of thick mild steel sheet duly ﬁnished in stoving enamel paint. Fitted with Mufﬂe Block for supporting heating elements working temperature 900ºC controlled by superior energy regulator or digital temperature controller cum indicator. Maximums temperature 1000ºC. Complete with CI/AL thermocouple with pyrometer, thermal fuse etc.

Internal Dimension in Inches	Internal Dimension in mm	Working Temperature
9 x 4 x 4	225 x 100 x 100	900C0
10 x 5 x 5	250 x 125 x 125	900C0
12 x 5 x 5	300 x 125 x 125	900C0
12 x 6 x 6	300 x 150 x 150	900C0
12 x 8 x 8	300 x 200 x 200	900C0
18 x 9 x 9	450 x 225 x 225	900C0

OPTIONAL ACCESSORIES:

Microprocessor Based PID Temperature Indicator-cum-controller in LED

MUFFLE FURNACE (Industrial Model)

Model No.: BE-0055

Same speciﬁcation as above model but maximum temperature is 1150° C with high clamp panel with include voltmeter, MCBs, Lights etc.

Internal Dimension in Inches	Internal Dimension in mm	Working Temperature
9 x 4 x 4	225 x 100 x 100	1100C0
12 x 6 x 6	300 x 150 x 150	1100C0
12 x 8 x 8	300 x 200 x 200	1100C0
18 x 9 x 9	450 x 225 x 225	1100C0

WATER STILL : (Manasty Type) SS

Model No.: BE-0056

Wall hanging stainless steel vessel is electrically operated for getting pyrogen fee distilled water.Wall hanging arrangement is provided. Condenser is stainless and ﬁtted with automatic ejection device which operates when water supply is cut off and chamber gets dry. Bafﬂe cup condenser are made of stainless steel sheet.

Capacity (Approximately)	Load
2 Liters/hour	2 KW
4 Liters/hour	4 KW
6 Liters/hour	6 KW

WATER STILL : (Barnstead Type)

Model No.: BE-0057

Double wall construction, stainless steel walls, condenser and trap & copper pipes in condenser.

Capacity (Approximately)

8-9 Liters/hour

15-16 Liters/hour

25-26 Liters/hour

BLOOD ROLLER MIXER

Model No.: BE-0058

We are engaged in delivering a comprehensive range of Blood Roller Mixer.We manufacture these products in the undersigned of our term of qualiﬁed professionals.We supply these to our respected clients at economical prices in the market.

Description:

For thorough mixing of blood samples and cell suspensions
Keeps the contents of closed tubes in gentle motion by rocking while rolling
Compact and ergonomic design
4 rolls of PVC rods for smooth operation
Can accommodate various sizes of centrifuge & tube

Technical Data:

Rolling Speed	10 30 RPM
Rocking frequency	5 Cycles per minute at 35° angle
No. Of rollers	4
Dimensions	455 x 265 x 120 mm
Exterior Body	MS Coated
Rolling Rods Material	PVC, each of 320 mm
Maximum Load	5 kg.
Supply	220 / 230 V, 50 Hz
Timer	No
Capacity	4 Roller Mixer

WATER BATH SEROLOGICAL

Model No.: BE-0059

FEATURES

Double wall
Outer body made of mild steel duly ﬁnished in powder
Inner chamber made out of stainless steel sheet of 304 grade .
30 to 100°C ±0.5°C controlled by thermostat.
To work on 220 VAC

Size in MM	Size in Inches	Capacity in Liters
300 x 300 x 175mm	12 x 12 x 7”	9 Liters
300 x 250 x 175mm	12 x 10 x 7”	14 Liters
375 x 300 x 175mm	15 x 12 x 7”	20 Liters
455 x 300 x 175mm	18 x 12 x 7”	24 Liters
600 x 300 x 175mm	24 x 12 x 7”	32 Liters

HIGH PRECISION WATER BATH

Model No.: BE-0060

Double wall construction, inner made out of stainless steel sheet and outer made of mild steel sheet duly ﬁnished in stoving enamel paint or powder coated. Glass window provided on opposite sides. A high speed regulated stirrer provided.Temp control is attained by a mercury contact thermometer or digital temperature controller with a Temp. range ambient to 100o C ±1oC.To work on 220 VAC.

Inner Chamber Size in MM	Inner Chamber Size in Inches	Capacity in Liters
425 x 250 x 225mm	17 x 10 x 9”	24 Liters
450 x 375 x 375mm	18 x 15 x 15”	64 Liters
600 x 450 x 450mm	24 x 18 x 18”	122 Liters
600 x 600 x 600mm	24 x 24 x 24”	216 Liters

THERMOSTATIC WATER BATH (Rectangular Double Wall)

Model No.: BE-0061

Double wall construction, inner made out of stainless steel sheet and outer made of mild controlled by a thermostat. Concentric rings have been provided on holes to accommodated various sizes of container/vessels.To work on 220V AC.

Size Inside (SS)	No. of Holes	Capacity in Liters
300 x 250 x 100mm	6 Holes 75 mm Dia	8 Liters
350 x 400 x 100mm	12 Holes 75 mm Dia	15 Liters

OPTIONAL ACCESSORIES :

Digital Temperature controller cum indicator
Low Water cut off

WATER BATH RECTANGULAR SINGLE WALL

Model No.: BE-0062

Body and rings of stainless steel sheet. It does not have a thermostat.To work on 220V AC.Various sizes are available.

Size Inside (SS)	No. of Holes	Capacity in Liters
300 x 250 x 100mm	6 Holes 75 mm Dia	8 Liters
350 x 405 x 100mm	12 Holes 75 mm Dia	15 Liters

PARAFFIN EMBEDDING BATH

Model No.: BE-0063

Double wall construction, inner made out of stainless steel and outer made of mild steel sheet duly ﬁnished in powder coating paint.Temp. range ambient to 80ºC ± 1ºC and is controlled by a thermostat with cups and sleeves for glass tube.To work on 220V AC.

Size

4 Cups and 6 sleeves

6 Cups and 8 sleeves

12 Cups and 8 sleeves

UNIVERSAL WATER BATH (Dual Purpose)

Model No.: BE-0064

It is a combination of serological and rectangular water bath with holes and concentric rings speciﬁcation as per both type o baths. Immersion heater attain temperature from ambient to 95ºC ± 1ºC.To work on 220V AC

Size Inside (SS)	Size in Inches	Capacity in Liters
300 x 225 x 175mm	12 x 9 x 7”	14 Liters
450 x 300 x 175mm	18 x 12 x 7”	25 Liters

OPTIONAL ACCESSORIES:

Stirring arrangement with stainless steel rod &
Digital PID type indicator-cum-controller.
Low water cut-off